Muncy Machine and Upson-Walton

Muncy™ G Buttons

Muncy G Buttons for OEM Applications

Muncy manufactures and stocks approximately 50 different G Buttons, each with different dimensions. These swaged carbon steel buttons all have various applications throughout the country, including in the fishing, grain and agricultural, food, architectural, construction and marine industries, to name a few.

G Button

All Muncy™ Machine and Tool fittings are machined from carbon steel specially selected for swaging. Aluminum and stainless steel available upon request.

CAUTION: Proper swaging practices are the sling manufacturers responsibility.

* Items noted below to be discontinued when present stock is depleted.
Call for availability and current quotation.

Stock No. Rope
Dia.
After Swage Dimensions Weight
lbs.
Each
A B
Min Nominal Max Approx.
G6-8 3/16 0.490 1/2 0.500 0.520 0.813 0.04
G6-12 3/16 0.740 3/4 0.750 0.770 1.125 0.14
G7-5 7/32 0.553 9/16 0.563 0.573 0.938 0.06
G8-4 1/4 0.428 7/16 0.438 0.448 1.250 0.04
G8-8 1/4 0.490 1/2 0.500 0.510 1.000 0.04
G8-14 1/4 0.490 1/2 0.500 0.510 1.125 0.05
G8-16 1/4 0.490 1/2 0.500 0.510 1.500 0.06
G8-20 1/4 0.615 5/8 0.625 0.635 0.875 0.07
G8-24 1/4 0.615 5/8 0.625 0.635 1.250 0.10
G8-28 1/4 0.615 5/8 0.625 0.635 1.500 0.12
G8-32 1/4 0.740 3/4 0.750 0.770 1.125 0.13
G8-36 1/4 0.740 3/4 0.750 0.770 1.250 0.15
G8-40 1/4 0.740 3/4 0.750 0.770 1.500 0.18
G8-44 1/4 0.855 7/8 0.875 0.895 1.000 0.17
G8-48 1/4 0.855 7/8 0.875 0.895 1.125 0.19
G8-52 1/4 0.855 7/8 0.875 0.895 1.250 0.21
G8-56 1/4 0.855 7/8 0.875 0.895 1.500 0.26
G8-60 1/4 0.980 1 1.000 1.020 1.125 0.26
G8-64 1/4 0.980 1 1.000 1.020 1.250 0.28
G8-68 1/4 0.980 1 1.000 1.020 1.500 0.32
G8-72 1/4 0.980 1 1.000 1.020 2.000 0.45
G8-76 1/4 1.230 1-1/4 1.250 1.290 1.750 0.64
G9-5 9/32 0.615 5/8 0.625 0.635 1.125 0.08
G10-3 5/16 0.740 3/4 0.750 0.770 1.250 0.13
G10-4 5/16 0.855 7/8 0.875 0.895 0.875 0.14
G10-8 5/16 0.855 7/8 0.875 0.895 1.000 0.16
G10-12 5/16 0.855 7/8 0.875 0.895 1.250 0.20
G10-16 5/16 0.855 7/8 0.875 0.895 1.500 0.25
G10-20 5/16 0.855 7/8 0.875 0.895 2.000 0.33
G10-24 5/16 0.980 1 1.000 1.020 1.438 0.31
G10-28 5/16 0.980 1 1.000 1.020 1.500 0.32
G12-3 3/8 0.855 7/8 0.875 0.895 1.500 0.23
G12-4 3/8 0.980 1 1.000 1.020 1.500 0.32
G12-5 3/8 0.980 1 1.000 1.020 1.000 0.30
G12-8 3/8 0.980 1 1.000 1.020 1.750 0.36
G12-12 3/8 0.980 1 1.000 1.020 2.000 0.41
G12-16 3/8 1.230 1-1/4 1.250 1.270 2.000 0.69
G14-1 7/16 0.855 7/8 0.875 0.895 1.625 0.23
G14-2 7/16 0.980 1 1.000 1.030 1.375 0.27
G14-3 7/16 0.980 1 1.000 1.030 1.500 0.32
G14-8 7/16 1.105 1-1/8 1.125 1.145 1.750 0.34
G16-2 1/2 0.980 1 1.000 1.020 1.750 0.33
G16-3 1/2 1.105 1-1/8 1.125 1.160 2.000 0.50
G16-4 1/2 1.230 1-1/4 1.250 1.270 1.250 0.40
G16-5 1/2 1.230 1-1/4 1.250 1.270 1.750 0.57
G20-3 5/8 1.355 1-3/8 1.375 1.420 2.500 0.93
G24-4 3/4 1.480 1-1/2 1.500 1.550 2.000 0.93
G28-2 7/8 1.730 1-3/4 1.750 1.800 2.500 1.50
G28-4 7/8 1.730 1-3/4 1.750 1.800 2.791 1.61
G28-8 7/8 1.730 1-3/4 1.750 1.800 3.000 1.74
G32-3 1 - 2 2.000 2.050 3.00 -
G36-1 1-1/8 - 2-1/4 2.250 2.300 4.13 -
G40-1 1-1/4 - 2-1/4 2.250 2.300 4.13 -

CAUTION

G Buttons are modeled after special use buttons. G Buttons are recommended for use on 6 x 19 or 6 x 37 IPS or XIP, EIP, RRL, or IWRC wire rope. G Buttons are not necessarily designed to hold the breaking strength of the attached wire rope. Before using a G Button for any other type lay, construction or grade of wire rope, it is recommended that the termination be proofloaded to prove the adequacy of the assembly. The efficiency of G Buttons is not rated. Item numbers are designed to indicate the wire rope size for the particular fitting. For instance, G8-14 is for 8/32", or 1/4", wire rope.