Muncy Machine and Upson-Walton

Aluminum Hourglass Sleeves | Muncy Industries

Aluminum Hourglass Sleeves are domestically extruded from high quality aluminum alloy and heat treated for cold forming properties. The return eye splice using these "Duplex Sleeves" are intended for use with 6 x 19 OR 6 x 37 Class, RRL, wire rope. When properly swaged, this hourglass shaped sleeve wil attain approximately 95% of EIP nominal wire rope strength.

Stock No. Size A B C D After Swage Diameter WT. PER 100
HG-1 1/32 3/32 1/8 3/64 1/4   .016
HG-1.4 3/64 1/8 3/16 5/64 3/8 0.140 .05
HG-2 1/16 11/64 1/4 5/64 3/8 0.187 .010
HG-2.5 5/64 13/64 5/16 3/32 3/8 0.234 .16
HG-3 3/32 9/32 13/32 1/8 1/2 0.281 .30
HG-4 1/8 1/2 5/32 5/32 5/8 0.312 .66
HG-5 5/32 3/8 9/16 3/16 11/16 0.375 .88
HG-6 3/16 7/16 21/32 7/32 1 0.437 1.6
HG-7 7/32 1/2 3/4 1/4 1-1/16 0.500 2.2
HG-8 1/4 17/32 13/16 9/32 1-1/8 0.563 2.8
HG-9 9/32 9/16 7/8 5/16 1-3/16 0.625 3.0
HG-10 5/16 11/16 1-1/32 3/8 1-1/4 0.687 4.6
HG-12 3/8 3/4 1-5/32 7/16 1-7/16 0.812 5.9
HG-14 7/16 15/16 1-7/16 1/2 1-11/16 1.000 12
HG-16 1/2 1-1/16 1-5/8 9/16 2 1.120 17
HG-18 9/16 1-1/8 1-3/4 5/8 2-1/8 1.250 22
HG-20 5/8 1-1/4 1-15/16 11/16 2-1/2 1.380 31


CAUTION

CAUTION: Proper swaging practices are the sling manufacturers responsibility. The assembly must be properly swaged to attain expected strength of the return eye splice of the wire rope.