Aluminum Thinwall Sleeves | Muncy Industries
| Stock No. | Rope Dia. | Dimensions | After Swage Dia | Weight (lbs. per 1,000) | ||||
| A | B | C | D | Nominal | Max | |||
| TW-3 | 3/32" | 7/32 | 3/8 | 7/64 | 1/2 | .216 | .231 | 2.1 |
| TW-4 | 1/8" | 11/32 | 1/2 | 11/64 | 5/8 | .315 | .335 | 5.7 |
| TW-5 | 5/32" | 3/8 | 9/16 | 13/64 | 11/16 | .345 | .365 | 7.5 |
| TW-16 | 1/2" | 27/32 | 1-3/8 | 17/32 | 2 | .854 | .884 | 100 |
CAUTION
Proper swaging practices are the assembly manufacturers responsibility. The assembly must be properly swaged to attain expected strength of the return eye splice of the wire rope. Testing is recommended to prove the adequacy of the assembly in the intended application.
- Casing Thimbles
- Slip-Through Thimbles
- Carbon Steel Thimbles
Alumium Swage Sleeves are Used With:
- Copper Swage Sleeves
Other Materials Available
- Carbon Steel Flemish Eye Sleeves
- Stainless Steel Flemish Eye Sleeves
- One-Piece Carbon Steel Turnback Sleeves
- Two-Piece Carbon Steel Turnback Sleeves
- Grommet Sleeves
- Swaged Steel Threaded Sleeves
