Stainless Steel Open Swage Sockets
Upson-Walton's Stainless Open Swage SocketsUpson-Walton, by Muncy, manufactures open swage sockets in 304 stainless. Our stainless is very comparable to our carbon steel dimensions, with the same pin diameters, jaw opening and after swage diameter on the shank, using the same dies. Our Made In USA sockets have a notably better aesthetics and look than other stainless sockets, which can translate to ours sockets having better quality, swageability, consistency and support.
Stainless Steel Swage Socket applications
Muncy's stainless swage sockets are used in variety of applications. Our sockets are used on both stainless and carbon steel approved ropes. The allure of stainless is both in better corrosion resistance and look. That makes our sockets ideal in marine applications, food, utility and architectural applications. The socket, or sometimes called "clevis" or "jaw", has many options for its use, as the pin can go through our closed swage sockets, shackles, eyes and custom made lifting or holding points.
Stainless Steel Rusting
Don't forget to wipe the socket shank down or even brush it with a stainless steel brush or pad after swaging, as the contact of the carbon steel alloy die may be enough to allow a light layer of rust over time on the shank. Most do not have stainless dies, so the carbon steel die can create an issue that is easily resolved.
| Stock No. | Rope Size | Dimensions | After Swage Min - Max |
|||||||||
| A | B | D | E | F | H | L | M | O | Y | |||
| 40025050 | 1/4 | 0.495 | 0.272 | 0.688 | 1-1/2 | 4-3/4 | 2-1/8 | 4 | 5/16 | 11/16 | 1-3/8 | 0.428 - 0.460 |
| 40031350 | 5/16 | 0.770 | 0.339 | 0.812 | 1-3/4 | 6-1/4 | 3-3/16 | 5-5/16 | 13/32 | 13/16 | 1-5/8 | 0.678 - 0.710 |
| 40037550 | 3/8 | 0.770 | 0.406 | 0.812 | 1-3/4 | 6-1/4 | 3-3/16 | 5-5/16 | 13/32 | 13/16 | 1-5/8 | 0.678 - 0.710 |
| 40043850 | 7/16 | 0.982 | 0.484 | 1.000 | 2 | 7-13/16 | 4-1/4 | 6-11/16 | 1/2 | 1 | 2 | 0.865 - 0.910 |
| 40050050 | 1/2 | 0.982 | 0.547 | 1.000 | 2 | 7-13/16 | 4-1/4 | 6-11/16 | 1/2 | 1 | 2 | 0.865 - 0.910 |
| 40056350 | 9/16 | 1.257 | 0.609 | 1.190 | 2-1/4 | 9-9/16 | 5-5/16 | 8-1/8 | 5/8 | 1-1/4 | 2-1/2 | 1.115 - 1.160 |
| 40062550 | 5/8 | 1.257 | 0.672 | 1.190 | 2-1/4 | 9-9/16 | 5-5/16 | 8-1/8 | 5/8 | 1-1/4 | 2-1/2 | 1.115 - 1.160 |
| 40075050 | 3/4 | 1.545 | 0.796 | 1.380 | 2-3/4 | 11-11/16 | 6-3/8 | 10 | 3/4 | 1-1/2 | 3 | 1.365 - 1.420 |
| 40087550 | 7/8 | 1.700 | 0.938 | 1.630 | 3-1/4 | 13-5/8 | 7-7/16 | 11-5/8 | 15/16 | 1-3/4 | 3-3/8 | 1.490 - 1.550 |
| 40100050 | 1 | 1.975 | 1.062 | 2.000 | 3-3/4 | 15-5/8 | 8-1/2 | 13-3/8 | 1-1/32 | 2 | 4 | 1.740 - 1.800 |
| 40112550 | 1-1/8 | 2.245 | 1.188 | 2.250 | 4-1/4 | 17-1/2 | 9-9/16 | 15 | 1-3/16 | 2-1/4 | 4-1/2 | 1.990 - 2.050 |
| 40125050 | 1-1/4 | 2.525 | 1.328 | 2.500 | 4-3/4 | 19-7/16 | 10-5/8 | 16-1/2 | 1-3/16 | 2-1/2 | 5 | 2.240 - 2.300 |
CAUTION
Swage Sockets are recommended for use on 6 x 19 or 6 x 37 Stainless Steel wire rope. Stainless Steel sockets are also approved for use on IPS or XIP (EIP), XXIP (EEIP), RRL, or IWRC wire ropes. Before using swage sockets with other type lay, construction or grade of wire rope, it is recommended that the termination be proofloaded to prove the adequacy of the assembly.
- Open Swage Sockets
Other Materials Available
- Closed Swage Sockets
- Stainless Steel Closed Swage Sockets
- Boom Pendant Open Swage Sockets
- Boom Pendant Closed Swage Sockets
Similar Products
- Open Rope Spelter Sockets
- Closed Rope Spelter Sockets
- Stainless Steel Open Rope Spelter Sockets
- Flat Rope Spelter Sockets
- Open Strand Spelter Sockets
- Closed Strand Spelter Sockets
- Type 6 Anchor Sockets
- Type 7 Anchor Sockets
- Type 8 Anchor Sockets
- Open Boom Pendant Sockets
- Closed Boom Pendant Sockets
- Open Bridge Bowl Sockets
- Closed Bridge Bowl Sockets
- Vibration Dampening Fittings
